Snom C520-WiMi User Manual page 38

Phone Features
The blue CELL 1 or CELL 2/HEADSET LED turns on (depending on the type of device
you have connected), and the
Note: The C520-WiMi can use only the first two Bluetooth devices on the Device
list for calls (as shown by the Device 1 and Device 2 soft keys on the Idle screen.
See page 11 for information about the Idle screen). For example, if you highlight
Device 3 on the Device list and then press
device up the Device list to make it available for calls. The device that occupied the
Device 1 or Device 2 positions will move down the Device list.
Deleting a device from the Device list
1. On the Device list, highlight the device you want to delete.
2. Press
Delete
The message Remove [device] from device list? appears.
Note: The device must be disconnected before the
3. Press
Yes
The message Device removed appears. If you want to use this device with the
C520-WiMi in the future, use the Add device menu to add it.
Renaming a device on the Device list
1. On the Device list, highlight the device you want to rename. This name will appear
on the Device list and on the soft key on the Idle screen used to activate the device.
Names between 1 and 8 characters will best fit the space available on the soft key.
2. Press or to display the
The renaming screen appears.
3. Use the dial pad keys to edit the device name.
• Press
ABC
letters, and numbers.
• Press
Backspc
4. Press
Save
Adding a new cell phone: From the Bluetooth menu, highlight Add device list and then
press .
The Add device menu appears.
Connect
.
.
Rename
to switch between entering upper-case letters, lower-case
to delete characters.
.
soft key changes to
, the C520-WiMi will move that
Connect
Delete
soft key, and then press
33
.
Discon'ct
soft key appears.
.
Rename