Changing The C520-Wimi Pin - Snom C520-WiMi User Manual

Phone Features
5. With Add cellular highlighted, press
6. Follow the instructions on the C520-WiMi screen.
7. Open the Settings menu on your cellular phone and activate Bluetooth. Ensure the
phone searches for new Bluetooth devices.
Note: Methods for activating Bluetooth may vary depending on your phone's
operating system.
8. When the CELL 1 and CELL 2 LEDs flash on the C520-WiMi, select C520-WiMi on
your phone's list of available Bluetooth devices.
9. If prompted by your phone, enter the C520-WiMi PIN. The default PIN is 0000.
After the device connects, the applicable C520-WiMi CELL LED turns on.
Adding a new headset
1. From the Bluetooth menu, highlight Add device list and then press
The Add device menu appears.
2. Highlight Add headset, and then press
3. Follow the instructions on the C520-WiMi screen.
The CELL 1 and CELL 2 LEDs flash on the C520-WiMi. After the headset connects,
the CELL 2/HEADSET LED turns on.
Note: Once you have added a device, the device stays paired with the C520-WiMi. Even
when your Bluetooth device is taken away or turned off, the C520-WiMi will reconnect to
the device when it is again within range and turned on with Bluetooth enabled.

Changing the C520-WiMi PIN

1. From the Bluetooth menu, highlight Change PIN and then press
The Change PIN menu appears.
2. Use the
Backspc
3. Press
Save
with the C520-WiMi.
soft key and the dial pad to edit the four-digit PIN.
. You will enter this PIN on your Bluetooth device when pairing it
.
.
34
.
.