Before Use - Snom C520-WiMi User Manual

Getting Started

Before use

Check for dial tone
• Press . If you hear a dial tone, and see that the status indicator turns green on the
base unit, the installation is successful.
If you do not hear a dial tone:
• Recheck the installation diagram and the connections to the unit.
• Ensure the unit is correctly configured with the correct SIP account information.
For more information, see the C520-WiMi Administrator and Provisioning Guide,
available at www.snom.com.
• Consult your service provider if you require additional user accounts or if you
suspect a service disruption is at fault.
Operating range
The maximum range between the conference phone and its wireless microphones and
any connected speakerphones can vary, depending on their locations and the layout of
your office.
When a wireless microphone is out of range, it must be returned to the charging cradle
to be able to reconnect with the phone.
If there is an incoming call while the wireless microphone is out of range, its green call
LED will not flash to indicate an incoming call. If the wireless microphone is moved
out of range during a telephone conversation, there may be interference. To improve
reception, move it closer to the conference phone.
5