Ringer Settings - Snom C520 WiMi Administrator And Provisioning Manual

––
C520 WiMi Administrator and Provisioning Manual
Using the WebUI

Ringer Settings

The Ringer Settings enable you to provide a distinctive ringing feature via the custom
Alert-Info header associated with an incoming call. This setting overrides the ringer tone you
have set for the account. For example, you can set a unique ringer tone to alert the C520
user upon receiving any incoming calls tagged as "important" in the Alert-Info header.
The SIP Invite message contains an Alert-Info header that the phone checks in order to
determine which ringer tone to play. The Alert-Info header format is as follows:
Alert-Info: info=info_text
If the header contains the "info" parameter, the phone attempts to match it to the Distinctive
Ringing Text. If there is a match, the associated tone will play. If there is no match, the
default tone for the account will play.
The matching is done on a "first match" basis. In the case of duplicate text strings, the ringer
tone associated with the first matched entry in the Distinctive Ringing Text list will play.
The server-side configuration must be done with your service provider. The SIP Invite text
("Distinctive Ringing Text" on the Ringer WebUI page) must be entered in the format ringerx,
where x is the ringer number from 1 to 10. For example, to match Ringer 1 enter ringer1.
The ringer settings are also available as parameters in the configuration file. See
""ringersetting" Module: Distinctive Ringer Settings" on page 134.
After entering information on this page, click
Setting
Distinctive Ringing Text
Tone
Description
Enter the text that will match the "info" parameter and play
the ringer tone. The Distinctive Ringing Text must be in the
format ringerx where x is the ringer tone 1 to 10.
Select the desired ringer from the list.
53
to save it.