Advertisement
Presence detector and motion detector 360° compact
(7) IR PIR 2 remote control (end customer), included in the scope of delivery
(8) IR PIR 1 remote control (installation engineer), see Accessories
3 Function
Intended use
-
Automatic switching of lighting depending on the heat motion and ambient brightness.
-
Indoor ceiling mounting, surface-mounted
Product characteristics
-
2-point light control
-
Functions settable with IR remote controls
-
Restriction of the detection field by switching off individual sensors or push-on cover.
-
Operation with IR remote control, 2-wire extension or installation button
-
Teach function for adjustment of the brightness threshold, in combination with IR remote
controls
-
Switch-off warning
-
Short-time operation, e.g. to activate acoustic signal encoders
-
Display LEDs
-
Presence simulation
-
Function as twilight switch
-
Dynamic run-on time
-
Extension of the detection area through parallel switching of multiple devices
i The extension of the detection area with 3-wire extensions is not possible.
Automatic operation
The device detects heat motions of people, animals and objects.
-
The light is switched on if a person enters the detection area and the brightness is below
the set threshold.
The run-on time restarts with each detected motion.
-
The light is switched off when it is no longer required because:
No more movement is detected in the detection area and the run-on time has elapsed or
the ambient light is too bright.
The switch-off brightness is calculated from the set brightness threshold and the connected
light.
To avoid brief shading from causing switch-off, switch-off only takes place when the set
run-on time has elapsed. The run-on time does not restart on movement detection for as
long as the switch-off brightness is exceeded.
i The minimum switch-off brightness is 100 lux, even if a lower value is set.
82593212
Figure 2
12.01.2017
2/18
Advertisement
