Table of Contents
Advertisement
2.3
Card Installation
Note!
We strongly recommend that you install the software driver before you
install the hardware into your system, since this will guarantee a smooth
and trouble-free installation process.
Turn off your PC's power supply whenever you install or remove the PCI
Express GbE card or its cables. Static electricity can easily damage
computer equipment. Ground yourself by touching the chassis of the
computer (metal) before you touch any boards. See the static warning
on Ch.2
1.
Turn off the computer and all peripheral devices (such as printers and monitors).
2.
Disconnect the power cord and any other cables from the back of the computer.
Remove the PC's cover (refer to your user's guide if necessary).
3.
4.
Install and plug the PCI Express GbE card on your PCI Express BUS.
Replace the PC's cover. Connect the cables you removed in step 3 and connect
5.
the power connector and power supply with the power cable in the package.
6.
Turn the computer power on.
7.
Install the driver in PCI Express GbE CD-ROM, see chapter 3.1, 3.2 and 3.3.
8.
Test your Ethernet port and verify if Ethernet port could work normally, see
chapter 4.
GbE Port PCIe Card User Manual
8
Advertisement
Table of Contents
