Adjustment Of The Tricycle - Vanraam VeloPlus3 User Manual

Hide thumbs Also See for VeloPlus3:
Table of Contents

Advertisement

Adjustment of the tricycle

Before using the tricycle, adjust it to the measurements of the cyclist. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the tricycle, as defined in the instructions, is not
possible, you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during
periodic maintenance.
Take care that fingers and limbs do not get trapped while adjusting the
tricycle.
Saddle height
When the cyclist is sitting on the tricycle and
can put a foot on the pedal in the lowest
position, the saddle height is correct. Adjust
the saddle height in such a way that the leg
is stretched but relaxed in that position.
To adjust the saddle:
1. Loosen the screw [A] in several turns
using the Allen key.
2. Adjust the saddle to the correct height.
3. Tighten the screw.
Do not pull out the saddle pin further than the
marking. The tube will not go into the shank deep
enough and will risk coming off. This can lead to
serious injuries.
User manual
VeloPlus3 17.12
[A]
MIN INSERT
5

Advertisement

Table of Contents
loading

Table of Contents