Adjustment Of The Tricycle - Vanraam Husky User Manual

Hide thumbs Also See for Husky:
Table of Contents

Advertisement

Adjustment of the tricycle

Before using the tricycle, adjust it to the measurements of the cyclist. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the tricycle, as defined in the instructions, is not
possible, you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during
periodic maintenance.
Take care that fingers and limbs do not get trapped while adjusting the
tricycle.
Saddle height
(Husky, Mini, Midi, Maxi)
When the cyclist is sitting on the tricycle and
can put a foot on the pedal in the lowest
position, the saddle height is correct. Adjust
the saddle height in such a way that the leg is
stretched but relaxed in that position.
To adjust the saddle:
1. Open the quick-clamp [A].
2. Slide the saddle to the correct height.
3. Close the quick-clamp.
Make sure clothing cannot get
caught in the clamp!
If the clamp closes too easily, the
clamping force is too low. In this case,
open the clamp and tighten the nut [B]
a bit more. If a lot of force is necessary
to close the clamp, the nut should be
loosened slightly.
User manual
Tricycles 17.04
[B]
[A]
5

Advertisement

Table of Contents
loading

Table of Contents