Table of Contents
Advertisement
Wheelchair transport
If you want to transport a wheelchair on the VeloPlus3, follow the instructions below.
1. Attach the parking brake to the bike by
squeezing the left brake [A] and lock it
with the pin [B].
2. Remove the safety pin.
3. Pull the handle up so the ramp unlocks
and falls down.
4. Push the wheelchair backwards on the
ramp. Push the wheelchair until the ramp
is tilting and locks itself automatically with
a clear noticeable click.
5. Attach the wheelchair with the three
belts. Push the button to release the belt
and attach the hooks to the wheelchair.
Always place the wheelchair
forward, in the driving direction, on
the ramp. (see image)
Be sure that the ramp is locking!
Failing to do so may result in
serious injuries.
If the ramp does not lock properly
then use your foot [A] to push
until the ramp locks.
Make sure that once the
wheelchair is placed on the ramp,
the wheelchair's weight causes
the ramp to fold up automatically.
When that is the case, the centre
of gravity of the wheelchair is
situated above the front wheels
of the bicycle. This creates the
correct weight distribution of the
bicycle.
User manual
VeloPlus3 17.12
1.
[B]
2.
4.
[A]
[A]
3.
"click" !
5.
7
Advertisement
Table of Contents
