Vanraam VeloPlus3 User Manual page 20

Hide thumbs Also See for VeloPlus3:
Table of Contents

Advertisement

Make sure that the switch is set to the side the battery is placed.
Backup battery (optional)
The bike can be supplied with a second
battery.
To activate the second battery (when the first
battery is empty) turn the switch under the
luggage carrier to the right sight.
Keep in mind that your bike provides less support when it's cold (0ºC and
less) and the battery will discharge faster. Charging also takes more time at
lower temperatures.
The action radius depends on a lot of different factors and is strongly
influenced by: capacity and voltage of the battery, degree of support that is
used, temperature, wind speed, tyre pressure, cycling speed, weight of the
user and the luggage, use of gearing etcetera.
Charging and maintenance tips for the battery
Every battery discharges automatically over time. This process is called self-
discharge. A battery that is empty and not charged, will self-discharge and
will be deep discharged. The battery can be permanently damaged during
this process. In case of deep discharge, the warranty will be void.
Please note that any battery will wear over time. The wearing process of the
battery is inevitable and depends on several factors, such as usage, number
of charge cycles and the ambient temperature. Even if the battery is not
used, its capacity will decrease. A worn battery can still be used, but please
bear in mind that its charge level may decrease.
User manual
VeloPlus3 17.12
19

Advertisement

Table of Contents
loading

Table of Contents