Vanraam VeloPlus3 User Manual page 18

Hide thumbs Also See for VeloPlus3:
Table of Contents

Advertisement

Charging the Battery
For the best performance and to prolong the
life of the battery, we recommend that you
charge the battery at home at room
temperature.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Pull the handle forward.
3. Take the battery pack from the holder.
4. Take the battery pack inside. First
connected the charger into the plug
contact of the battery.
5. Then connect the charger plug into the
mains socket. Turn the switch [A] on. A
green LED light on the charger will start
to blink fast. Now the battery will
recharge.
Beware! If the battery is not
connected properly, the green LED
light blinks slowly. In case of a poor
contact, the connector of the
charger needs to be cleaned.
6. Depending on the battery level, the
charging time is about 2,5 hour.
7. Once the battery is fully charged, the
green LED light stays on. Pull the plug
from the mains socket first or turn the
switch [A] off.
8. Then pull the connector from the battery.
User manual
VeloPlus3 17.12
1.
2.
5.
3.
4.
[A]
17

Advertisement

Table of Contents
loading

Table of Contents