Adjustment Of The Tricycle - Vanraam VeloPlus3 User Manual

Hide thumbs Also See for VeloPlus3:
Table of Contents

Advertisement

Adjustment of the tricycle

Before using the tricycle, adjust it to the measurements of the cyclist. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the tricycle, as defined in the instructions, is not possible,
you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during periodic
maintenance.
Take care that fingers and limbs do not get trapped while adjusting the tricycle.
Saddle height
When the cyclist is sitting on the tricycle and can put a
foot on the pedal in the lowest position, the saddle
height is correct. Adjust the saddle height in such a way
that the leg is stretched but relaxed in that position.
To adjust the saddle:
1.
Open the quick-clamp [A].
2.
Slide the saddle to the correct height.
3.
Close the quick-clamp.
Make sure clothing cannot get caught in the clamp!
If the clamp closes too easily, the clamping force is too low. In
this case, open the clamp and tighten the nut [B] a bit more. If
a lot of force is necessary to close the clamp, the nut should
be loosened slightly.
Version 21.01
[B]
[A]
7/51

Advertisement

Table of Contents
loading

Table of Contents