Vanraam VeloPlus3 User Manual page 7

Handlebars height
The height of the handle bars affects the
comfort of the ride. It determines the pressure
on the hands and the position of the back.
Determine your own most comfortable height
by using the bike.
To adjust the handlebars:
1. Slightly loosen the screw by using an Allen
key.
2. Slide the handlebars to the correct height
and tighten the screw very firmly again.
Do not pull out the handle bars further than the
mark. Otherwise the tube will not be deep enough in
the shaft and will risk coming off, which can lead to
serious injuries.
Position handle bars
You can tilt the handlebars. This influences
the distance from the handlebar to the upper
body. Determine your own most comfortable
position by using the bike.
To tilt the handlebar:
1. Slightly loosen the screws [A] and [B] with
an Allen key.
2. Put the handlebar in the desired position
and then tighten the screws considerably.
3. Slightly loosen screw [C] with an Allen key,
put the handlebar in the correct
(horizontal) position and then tighten the
screw again.
Steering damper
The steering damper affects the stability
during steering. By adjusting the screw,
steering gets more rigid and stability will
increase. Determine your own most
comfortable setting for using the bike.
User manual
VeloPlus3 17.12
1.
MIN INSERT
3.
[A]
1.
2.
2.
[C]
[B]
6