Panasonic KX-TDA600 Installation Manual page 64

2.2 Installation of the Hybrid IP-PBX
5.
Install 4 anchor plugs in the holes on the floor.
Then, fasten the base stands to the floor loosely with 4 screws (A). (This makes it easy to adjust the
position of the shelves later.)
Screw (A)
Washer
6.
Remove the 4 tabs on the top cover of the Basic Shelf, by using a flathead screwdriver, as shown below.
64 Installation Manual
Anchor
Plug
Basic Shelf
WWW.ERTEBATGROUP.COM
Floor
WWW.ERTEBATGROUP.COM
Hammer
Anchor Plug
30 mm
8 mm
Screw (A)
Washer
Base
Stand