Panasonic KX-TDA600 Installation Manual page 61

WWW.ERTEBATGROUP.COM
Notes
• Make sure to remove the front cover from each shelf before installing the shelves (refer to "2.2.3
Opening/Closing the Front Cover").
• Do not install any optional service cards or a PSU in the shelves before installation.
• Do not block the openings of the shelf. Allow space of at least 10 cm at the sides of the shelf, and
20 cm above the top-mounted shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
• Be careful not to drop the shelf.
Installing the Basic Shelf
To install the Basic Shelf, attach the metal bracket (supplied with the Basic Shelf) to the base stands
(supplied with the Mounting Kit) first. Then, install the base stands on the floor and fix the Basic Shelf to
them.
1.
Attach the support brackets to the base stands.
Note
If necessary, it is possible to reverse the direction of the base stands as shown below:
Support Bracket
Base Stand
WWW.ERTEBATGROUP.COM
2.2 Installation of the Hybrid IP-PBX
Installation Manual 61