Panasonic KX-TDA600 Installation Manual page 96

2.2 Installation of the Hybrid IP-PBX
5.
Plug each Bus Cable into the corresponding port of the BUS-M card in the Basic Shelf. Then, plug the
other end into the BUS-S card in each Expansion Shelf.
Note
When plugging or unplugging the Bus Cables, make sure that the DC power supply is turned off.
Bus Cable
96 Installation Manual
For Expansion
Shelf 3
For Expansion
Shelf 2
For Expansion
Shelf 1
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM