Panasonic KX-TDA600 Installation Manual page 212

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA600:
Table of Contents

Advertisement

2.10 Connection of DECT Portable Stations
3.
Repeat steps 1 and 2 for other CSs, and relocate the CSs when necessary.
a.
Overlap adjacent CS coverage areas where the radio signal strength level is "8" by 5 m to 10 m.
Channel no. 0
b.
Overlap the CS coverage areas of at least 2 CSs at any location in the installation site.
Channel no. 0
Channel no. 2
c.
Make sure that the radio signal strength level is greater than "3" at any location in the service area
required by the user.
Notes
If a channel is set, the results of measurement for the 24 slots on the channel are saved each time.
If the same channel is set, the new results override the previous ones. Therefore, a measurement
of 10 channels × 24 slots in total can be made.
If correct results cannot be obtained (e.g., there are many frame errors), change the location of the
CS and repeat the site survey to select the best location.
212
Installation Manual
5 m to 10 m
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM
Channel no. 1
Channel no. 1
Channel no. 3

Advertisement

Table of Contents
loading

Table of Contents