Download  Print this page

Backup Battery Connection - Panasonic KX-TDA600 Installation Manual

Hybrid ip-pbx.
Hide thumbs


Table of Contents

2.2.11 Backup Battery Connection

The backup batteries and Back-up Battery Cable provide a backup power supply to allow full use of the
Hybrid IP-PBX in the event of a power failure. In case of power failure, the backup batteries automatically
maintain the power to the Hybrid IP-PBX without interruption.
User-supplied Items
Backup Batteries: VRLA (Valve Regulated Lead Acid) 12 V DC × 3
Back-up Battery Cable: KX-A228 (for PSU-M) or KX-A229 (for PSU-L)
Make sure that each Back-up Battery Cable is securely fastened to both the backup batteries and
the shelf.
Be sure to comply with applicable local regulations (e.g., laws, guidelines).
Make sure that the polarities of the backup batteries and wiring are correct.
Make sure that you do not short the backup batteries or cables.
There is a danger of explosion if backup batteries are incorrectly replaced. Replace only with the
same or equivalent type recommended by the battery manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
Use the correct type of Back-up Battery Cable for the PSU.
Turn on the battery switch on the PSU only after the installation of the shelves is finished and AC
power is available.
It is recommended to connect all installed shelves of the system to backup batteries. Note that
backup batteries can not provide a backup power supply to any shelves which are not directly
connected to the backup batteries.
The recommended maximum capacity per shelf is 28 Ah, to maintain effective battery charge.
Make sure that the type and capacity of the 3 backup batteries are identical.
The Back-up Battery Cable should not be exposed to direct sunlight. Keep the Back-up Battery
Cable and the backup batteries away from heating appliances and fire. Place the backup batteries
in a ventilated place.
For details about the backup batteries, refer to the manual for the batteries.
Backup Power Supply Duration
The length of time that backup batteries can power the shelves varies depending on the total load figure of
the shelves to which the backup batteries are connected. For how to calculate the load figure from the
connected items, refer to "Load Figure Calculation".
Battery Capacity
28 Ah
The duration may vary depending on the conditions.
Total Load Figure of the
Connected Shelves
2.2 Installation of the Hybrid IP-PBX
Backup Power Supply Duration
5.5 h
3 h
Installation Manual


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: