Panasonic KX-TDA600 Installation Manual page 78

2.2 Installation of the Hybrid IP-PBX
Connecting Shelves
For a 3- or 4-shelf system, you need to install an optional BUS-M card and BUS-ME card(s) in the Basic
Shelf. To connect the shelves, plug the Bus Cables (supplied with the BUS-M card or BUS-ME card) into the
slots of the BUS-M card. Then, plug the other end of each Bus Cable into the BUS-S card built in to each
Expansion Shelf.
For details about the cards, refer to "2.4.1 BUS-M Card (KX-TDA6110)", "2.4.2 BUS-ME Card (KX-
TDA6111)", and "2.5.1 BUS-S Card".
Note
When installing or removing the BUS-M card, make sure that the DC power supply is turned off.
1.
Mount 1 BUS-ME card (for a 3-shelf system), or 2 BUS-ME cards (for a 4-shelf system) on the BUS-M
card as shown below.
BUS-M Card
78 Installation Manual
BUS-ME Card
(for Expansion Shelf 3)
inside
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM
BUS-ME Card
(for Expansion Shelf 2)