Table of Contents
Advertisement
1
GENERAL INFORMATION
Dear Customer,
congratulations on your choice and thank you for placing
your confidence in our products. With Power Plus Box 1001
you have chosen technology that is the very essence of
energy saving and functionality.
Moreover, all
products conform to the strictest
B
directives and European standards in force.
This product was produced, amongst others, in conformity
to the following directives and standards:
- Directive 2009/142/EC - Gas Appliances
- Directive 92/42/EEC on efficiency requirements
and Annex E and Pres. Republic Decree n. 412, 26
August 1993 (****)
- Electromagnetic Compatibility Directive 2004/108/EC
- Low Voltage Directive 2006/95/EC
- Ecodesign Directive 2009/125/CE for energy-related
products
- Delegated Regulation (EU) N. 813/2013
- EN 15417 Gas-fired central heating boilers - Specific
requirements for condensing boilers with a nominal
heat input greater than 70 kW but not exceeding
1000 kW
- EN 13836 Gas fired central heating boilers - Type B
boilers of nominal heat input exceeding 300 kW, but
not exceeding 1000 kW.
The Power Plus Box 1001 condensing modular systems
moreover conform to the regulatory provisions pursuant to
the INAIL "R" File, section R.3.B.
has been certified with UNI EN ISO 9001/2000 since
B
22.07.2004.
is furthermore a product having to its
Power Plus Box 1001
credit:
-
European Conformity Mark (based on Directive
92/42/CEE) issued by the authorized German
certification organization
- Maximum energy efficiency class (according to
Directive 92/42/EEC) identified by the symbol ****;
- Classified in the strictest class for nitrogen oxide-
related pollution (fifth grade according to UNI EN
297)
- Patented heat exchanger.
2
WARNINGS
b
The heating unit must be used for the purpose for
which it was specifically designed and produced. Any
whatsoever contractual or extra-contractual liabilities
for damages caused to persons, animals or objects
due to errors in installation, adjustment, maintenance
and improper usage are to be excluded.
b
Installation must fully comply with provisions of
the law in force and instructions provided by the
manufacturer to ensure safety and correct functioning,
always calling upon professionally qualified technical
personnel who will issue the declaration of conformity
for
the
installation
workmanship, in compliance to regulatory provisions
in force and guidelines given in this handbook. The
appliance must be installed in appropriate premises
and together with the specific systems installed
according to the law.
b
Commissioning will be carried out by personnel from
the authorized Technical Assistance Centre only and
;
accomplished
with
good
within 8 days from when the appliance was installed.
After initial ignition the Technical Assistance Centre
will fill in the warranty certificate, leaving the user their
part to be kept, marking the beginning of the period
of guarantee at the terms and conditions specified
on the relative slip.The appliance in its original packing
may be exposed to temperatures between 4°C and 40°C.
Do not expose the appliance to bad weather conditions
after it has been unpacked, anyhow to temperatures
below 4°C or above 40°C until it has been connected
up to the water, gas and electricity mains so as to be
able to activate the frost protection systems described in
paragraph 6.2.6.
b
Check that the product is complete, undamaged
and as ordered as soon as you receive it. Report any
discrepancies or damage to the
b
In case of leaks, disconnect the heating unit from the
mains, close the water from the mains and promptly
contact the Technical Assistance Centre.
b
Regularly check that the condensate drain is free from
obstruction.
b
Regularly check that the working pressure of the water
circulation system, when cold, is below the maximum limit
specified for the appliance. If not, contact the Technical
Assistance Centre.
b
Maintenance jobs on the heating unit must be carried out
by personnel from the authorized Technical Assistance
Centre. Maintenance must be performed at least once a
year. Correct maintenance is essential for safety as well
as for the efficiency and long working life of the product.
Proper maintenance keeps consumption and emissions
down, and ensures that the product continues to operate
reliably over time. Analyse the combustion fumes before
commencing maintenance. The results of fume analysis
can give a clear idea of what servicing or repairs are
needed.
b
We recommend cleaning inside the exchanger once
a year, extracting jet and burner and removing any
installation debris by suction. This operation will be done
by personnel from the Technical Assistance Centre only.
b
The warranty slip endorsed during the course of
commissioning will have to be produced for any servicing
required during the guarantee period. The manufacturer
shall not be held liable for any damages caused by
mishandling, improper use or errors in installation, use
and maintenance work on the appliance. In the event
of breakdown or malfunction switch off the appliance,
avoiding to make any attempt to repair it and contact the
Technical Assistance Centre.
b
This manual must be read carefully for the boiler to be
used rationally and safely, and must be kept with care
so as to be on hand where required by the technician or
installer, to facilitate the appropriate installation, running
and maintenance of the boiler.
liable for any translations possibly giving rise to wrong
interpretation. This manual is an integral part of the
heating unit and must consequently be kept with care
and must ALWAYS accompany the boiler even when
passed on to another owner or user or transferred to
another installation. Ask the Technical Assistance Centre
for another copy if it should be lost or damaged.
B
dealer who sold it.
will not be held
B
3
Advertisement
Table of Contents
