Use And Adjustment - Beretta Power Plus Box 1001 INT Installation Manual

8

USE AND ADJUSTMENT

8 .1 Control panel: description
The Power Plus Box 1001 panel is located inside the
Master board and is reached by opening the front panel.
The various buttons on the panel cover a large range of
functions going from simply monitoring the principal system
parameters to configuring the heating unit dependant on
the type of system found downstream from the latter.
BUTTON
S1
S2
S3 System selection button
S4
S5
S6 Confirmation button
U2 Illuminated display
U3 Illuminated display
D4
D5
KEY
Reset button
Set/esc button
Increase button
Reduce button
Green led
Red led
The control panel was designed to enable the user to enter
the various user modes; each one of these has a set of
corresponding functions, activated by pressing a button or
combination of two buttons pressed together. Furthermore,
each button has a specific function depending on the
selected user mode.
DESCRIPTION
Serves to release the electric board after a permanent arrest
Press to enter parameter mode and monitor mode for individual
Press to visualize functional status of the various master systems
Press to increase a specific value
Press to reduce a specific value
Press to memorize new values
Displays information on boiler status
Displays information on boiler status
If on, it indicates the system is live
If on, it indicates a possible fault
Figure 21
units
19