Table of Contents
Advertisement
REMOTE CONTROL USER MANUAL
Dear Client,
Beretta has always been committing itself to comply with the demands of its
own Clients and uses all its experience and competence for the realization
of all its appliances.
We made this advisory manual in order to let you become familiar with your
new boiler and appreciate with maximum satisfaction the advantages of
autonomous heating and instantaneous hot water production.
The Remote control panel complies with the following Directives:
- Electromagnetic compatibility Directive 2004/108/CEE
- Low-voltage Directive 2006/95/CEE
1 - GENERAL SAFETY INFORMATION
FOR A PROPER USE OF THE REMOTE CONTROL PANEL, PLEASE READ
CAREFULLY THE ENTIRE CONTENTS OF THIS MANUAL.
WARNINGS
1)
The remote control panel has to be installed in the room most accessible
for checking the temperature of the environment (normally the living
room).
2)
In order to read the display more easily, the remote control panel has
to be placed, according to standards, at a height of 1.5 metres from the
floor.
3)
The control panel is supplied with low-voltage directly by the boiler.
Nevertheless, it contains a buffer battery, which guarantees the main-
tenance of the user settings even when there is a blackout or a break
in the boiler connection.
4)
It is essential that the control panel be kept away from heat sources
and draughts: these may affect the accuracy of the room thermostat
incorporated in the panel.
5)
Do not attempt to open the panel: it requires no maintenance.
6)
Do not press against the surface of the liquid crystal display: this could
damage the surface itself and cause viewing problems.
7)
To clean the display, simply wipe with a dry cloth: any infiltrated liquid
could damage the liquid crystals.
HOW TO USE
The remote control panel has three operating modes:
1)
ROOM THERMOSTAT
The control panel keeps the temperature of the environment constant,
based on the settings made by the user.
2)
PROGRAMMABLE ROOM THERMOSTAT
In this mode, advanced settings are available; you can decide how and
when the boiler will switch on to heat up the environment.
3)
BOILER CONTROL
In this mode, the control panel works only with the boiler controls; it does
not control the temperature of the environment. For that, you should
use an external room thermostat.
In some parts of the manual, these symbols are used:
ATTENTION = for actions that require particular caution and proper
training
FORBIDDEN = for actions that MUST NOT be performed
Please read carefully because, following our information and advice, you
would be able to use properly your new appliance and provide for its proper
maintenance.
Having finished reading, you should keep it with care; it could be useful for
a later consultation.
This instructions manual is integral parts of the product. Make sure they
remain with the boiler, even if it is transferred to another owner or user or
moved to another heating system. In case of loss or damage, please contact
your local Technical Assistance Service for a new copy.
This boiler may only be installed and serviced by qualified fitters who
satisfy the requirements of local rules. Work must be done in compliance
with regulations in force and subsequent updates.
The boiler must be serviced at least once a year. This should be booked
in advance with the Technical Assistance Service.
The installer shall instruct the user in the operation of the boiler and the
safety devices.
This boiler may only be used for what it was expressly built to do. The
manufacturer declines all contractual and non-contractual liability for
injury to persons or animals or damage to property deriving from errors
made during installation, adjustment and servicing and from improper
use.
When the product reaches the end of its life it should not be disposed
of as solid urban waste but should be brought to a separated waste
collection facility.
The safety and automatic adjustment devices on the appliance must
never be modified during its lifetime, except by the maker or dealer.
If the appliance develops a fault and/or works badly, switch it off and do
not attempt to repair it yourself.
In the event of leaks, he/she must shut off the water supply and promptly
inform the Technical Assistance Service.
Must periodically check, on the display, that the pressure value is be-
tween 1 and 1,5 bar; if not fill the system as described in the paragraph
"Boiler functions".
If the boiler is not planned to be used for a long period, he/she should
call in the Technical Assistance Service to perform the following opera-
tions:
- turn off the main boiler and general system switches.
- close the gas and water taps on the heating circuits.
- drain the heating circuits to prevent freezing.
METEO GREEN HE R.S.I.
0694
37
Hide quick links:
Advertisement
Table of Contents
