3. Push the service key at the indicated location inside and turn it clockwise to put the tension on the
TTF belt.
4. Carefully push the right-hand TTF unit down, using the red press plates.
When the red press plates are not present, carefully push on the indicated area to close the right-
hand TTF unit.
Cable guide
Spring
B
Screw (POS 63)
A
5. Use socket wrench 10 to tighten the two bolts of the right-hand TTF Unit.
CAUTION
Hot area. Use heat-resistant gloves.
Océ VarioPrint 6000 line
1
2
A
A
Chapter 3 - Maintenance tasks - Level 2
Close the TTF units
83