Lock The Opc Unit (Right) - Oce VarioPrint 6180 Titan Maintenance Manual

Lock the OPC unit (right)

Procedure
1. Rotate the metal OPC pulley until the end of the back side of the OPC belt runs near (+/- 0.1 inch)
the arrows of the yellow registration board.
[87] Reposition the OPC belt
2. Use the red handle to push the OPC unit inwards as far as possible.
[88] Move the OPC unit in
3. Use the service key to turn K5 clockwise into the locked position.
4. Use the service key to turn K4 counter-clockwise into the locked position.
5. Use the service key to turn K3 counter-clockwise into the locked position.
6. Use the service key to turn K2 counter-clockwise into the locked position.
7. Use the service key to turn K1 counter-clockwise into the locked position.
[89] Lock the OPC unit
Océ VarioPrint 6000 line
K5
K4
K3
K1
K2
Lock the OPC unit (right)
Chapter 3 - Maintenance tasks - Level 2 71