Disassemble And Assemble The Preheat Unit - Oce VarioPrint 6180 Titan Maintenance Manual

Disassemble and assemble the preheat unit

Disassemble and assemble the preheat unit
Procedure
CAUTION
Hot area. Use heat-resistant gloves.
1. Press both red leaf springs at the preheat unit plate outwards and pull out the plate.
[54] Disassemble the preheat unit
2. Turn both belts to remove the sheets inside the preheat unit.
[55] Turn the belts
3. Put the preheat unit plate back.
[56] Assemble the preheat unit
50 Chapter 3 - Maintenance tasks - Level 2
Océ VarioPrint 6000 line