Advertisement
5-2
FRONT END
SCREW
CONTROL CABLE
2380
Fig. 5-2-Air Outlet Control Cable
SHROUD SIDE AIR OUTLET
DUCT ASSEMBLY
"A-B-C-D-E" Body Styles
Removal and Installation
1. Remove shroud side finishing panel.
2. Disengage control cable from outlet assembly
and
1
loosen cable attaching screw (Fig. 5-2).
3. Remove screws securing outlet assembly to
shroud panel and remove outlet assembly (Fig.
5-1).
MEDIUM-
BODIED
SEALER
DUCT ASSEMBLY
PRESS
™
N
S5Sn
DOOR
HINGE PILLAR
PANEL AND
DUCT SCREWS
Fig. 5-3-Shroud Side Air Outlet Duct Assembly
and Sealing
Fig. 5-4—Shroud Side Finishing Panel and Air Outlet
Duct Assembly - " - X - Z " Styles
4. To install, apply a bead of medium-bodied
sealer around entire inner flange of outlet
assembly
(Fig. 5-3) and reverse removal
procedure.
SHROUD SIDE FINISHING PANEL AND
AIR OUTLET DUCT ASSEMBLY-
14
- X - Z " Body Styles
Removal and Installation
1. With a flat-bladed tool (screw driver or equiv-
alent), pry the outlet grille from the assembly
(Fig. 5-4).
2. Remove screws attaching finishing panel and
duct assembly to shroud (Fig. 5-4).
3. Remove sill plate.
4. Remove finishing panel, to hinge pillar attach-
ing screw (Fig. 5-4), and remove assembly.
5. To install, apply a generous bead of medium-
bodied sealer to flange of finishing panel and
duct assembly (Fig. 5-5) and reverse removal
procedure.
SHROUD SIDE AIR OUTLET DUCT DOOR
Removal and Installation—
("A-B-C-D-E" Styles)
1. Remove shroud side air outlet duct assembly.
Advertisement
