Advertisement
DOORS
6-75
LASS RUN CHANNE
fOUTER STRIP ASSEMBLY
SCREWS
GLASS RUN CHANNEL
UPPER BOLT
^mm
\
,, DOOR LOCK
GLASS RUN CHANNEL
LOWER ADJUSTING
STUD & NUT
1028
Fig. 6-101—Door Hardware Attachments -
" B " Closed Styles
channel roller and remove guide through large
access hole.
CAUTION:
With guide removed, door glass
should be held, or otherwise suitably sup-
ported, to prevent damage.
4. To install, reverse removal procedure.
FRONT DOOR WINDOW GLASS RUN
CHANNELS-"X-37" Style
Removal and Installation
1. Remove door trim assembly and detach inner
panel water deflector.
2. Remove door ventilator and window assembly.
3. Remove bolts securing run channel to lock
pillar panel and remove from door.
4. To install, reverse removal procedure (see
Fig. 6-99).
FRONT DOOR WINDOW GLASS RUN
CHANNELS-"X-11-35 and 69" Styles
Removal and Installation
1. Remove door trim pad and detach inner panel
water deflector.
2. Remove front door window.
3. Press (finger pressure) sides of run channel
together and remove assembly from door upper
frame (see View "A" for "11" Styles and View
"B" for "35 and 69" Styles in Fig. 6-100).
4. To install, reverse removal procedure.
FRONT DOOR WINDOW REAR GLASS
RUN CHANNEL-"Z" Body Styles
1. Lower door window and remove door trim pad
and inner panel water deflector.
2. Remove glass run channel upper attaching
screw and lower adjusting stud nut.
3. Disengage run channel from rear edge of glass
and remove run channel through large access
hole.
4. To install, reverse removal procedure.
.CHANNEL
TOOL J-21549
2147
Fig. 6-102 —Door Window Glass Run Channel Removal
Advertisement
