Fisher Chevrolet 13000 series Service Manual page 285

13-38 FOLDING TOP
it can be made at folding top male hinge.
3. When front roof rail is properly adjusted,
tighten lock assembly and install weatherstrip
attaching screws.
FRONT ROOF RAIL LOCK ASSEMBLY
Removal and Installation
1. Unlock top from windshield header.
2. With top in a half-open position, remove lock
attaching screws; then remove lock assembly
from front roof rail. (See View "A", Fig.
13-77).
3. To install, reverse removal procedure.
FRONT ROOF RAIL LOCK
ADJUSTMENT
If the locking action of top is unsatisfactory, the
hook on the lock assembly may be adjusted as
follows:
1. To tighten or increase locking action, turn
lock hook clockwise.
2. To reduce or decrease locking action, turn
lock hook counterclockwise.
Fig. 13-78— " A " Body Convertible Top Linkage Attachments