Download Print this page

Fisher Chevrolet 13000 series Service Manual page 196

1967 body manual

Advertisement

REAR QUARTER
7-25
6. To install, reverse removal procedure.
NOTE:
The procedure for removing the elec-
tric motor from the regulator is described
under "Door and/or Quarter Window Regulator
Electric Motor Assembly''.
REAR QUARTER WINDOW FRONT
GUIDE-"B-C 47-57-67-87" Styles
Removal and Installation
1. Remove rear quarter trim assembly and inner
panel water deflector or access hole cover.
2. With window in full-up position, remove front
guide upper and lower adjusting stud nuts ("2"
and " 3 " , Fig. 7-43).
3. Pull guide downward and rearward to disengage
from rollers on window assembly and remove
guide through access hole.
4. To install, reverse removal procedure.
REAR QUARTER WINDOW FRONT
GUIDE ASSEMBLY-"A-X-Z" Hardtop
and Convertible Styles and "E-87" Styles
Removal and Installation
1. Remove rear quarter window assembly.
2. On "A, X & Z" styles, remove front guide
upper and lower adjusting stud nuts (refer to
Fig. 7-25 and 7-26. These illustrations are for
"A" Bodies but are indicative of all styles).
NOTE:
As explained under "Rear Quarter
Window Assembly" - Removal and Installation
for "E" bodies, the front guide attachments
must be removed and guide lowered prior to
removal of window assembly.
3. Disengage guide adjusting studs from slots in
quarter inner panel and remove guide through
access hole on all except "E" styles. On "E"
bodies, remove front guide between rear quar-
ter inner and outer panels at belt.
4. To install, reverse removal procedure. Adjust
guide for proper window operation as specified
under "Rear Quarter Window Adjustments".
NOTE:
The rear channel of the front guide of
most styles is equipped with an adjustable
lower stop to control height of quarter window
in the lowered position (see Fig. 7-44).
Fig. 7-41— Rear Quarter Window Assembly - "B-87" Styles
1. Rear Quarter
Window
2. Lower Sash Channel
Assembly
3. Lower Sash Channel
Inner Filler
4. Lower Sash Channel
Outer Filler
5. Bolt
6. Spacer
7. Nut
8. Front Vertical
Sash Channel
Fig. 7-42—Rear Quarter Window Assembly -
"B-C-47-57-67" Styles
Rear Quarter Window
Front Sash Channel
Lower Sash Channel
Lower Sash Channel
Inner Filler
Lower Sash Channel
Outer Filler (Not
on "B-57" Styles)
6. Nut
7. Spacer
(Rubber)
8. Washer
(Rubber)
9. Washer
(Metal)
10. Roller

Advertisement

loading