Battery Status - Motorola MC9500-K User Manual

Battery Status

The MC9500-K battery provides status information on the front of the battery that allows the user to make
determination on what battery to use. The battery status indications vary depending upon the mode of the battery:
•
Installed in an MC9500-K
•
In a charger
•
stand-alone.
Installed in an MC9500-K
When the 4800 mAh battery is installed in the MC9500-K, the user can view the charge status and health of the
battery (see
Figure
MC9500-K. If the battery is unhealthy, the Charge Level indicator displays an "X" (see
Battery in MC9500-K
Figure 2-3
Press the Status button to display the current battery charge level. It will display for five seconds and then revert to
the previous display.
When the MC9500-K is charging in a cradle, the battery front panel is not visible but is visible when
NOTE
using a charging cable. The Charge Level indicator display an unknown state indication (see
2-2).
2-3). The battery Charging Status LED is disabled when the battery is installed in the
Battery Status LED
Charge Level Indicator
Status Button
Table 2-1 list the Charge Level indications when the Status button is pressed.
Battery Management
Figure 2-3).
Table
2 - 3