Motorola MC9500-K User Manual page 95

•
Dial-up Networking
•
HID Client
•
A2DP/AVRCP.
See the following sections for information on these services.
Object Push Services via Beam
NOTE You can only send files to a remote device using the Beam function.
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC95XX and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Programs > File Explorer.
3.
Navigate to the file to transfer.
4.
Tap and hold on the filename until the pop-up menu appears.
5.
Select Beam File. The MC95XX searches for Bluetooth devices in the area.
6.
Tap Tap to send next to the Bluetooth device to send the file to. The MC95XX communicates with the device
7.
and send the file. When completed, Tap to send changes to Done.
To transfer a contact between the MC95XX and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Contacts
3.
Navigate to the contact to transfer.
4.
Tap and hold on the contact until the pop-up menu appears.
5.
Select Send Contact > Beam. The MC95XX searches for Bluetooth devices in the area.
6.
Tap Tap to send next to the Bluetooth device to send the file to. The MC95XX communicates with the device
7.
and send the contact. When completed, Tap to send changes to Done.
Internet Sharing
Internet Sharing allows the user to connect a computer or laptop to the MC95XX and use the MC95XX as a
modem to connect to an office network or ISP.
To use MC95XX as a modem using Bluetooth:
Ensure that the device is not connected to the computer or laptop.
1.
On the MC95XX, ensure that the Phone is on and a data connection is configured.
2.
Tap > Programs > Internet Sharing.
3.
In the PC Connection list, select Bluetooth PAN.
4.
Using Bluetooth 7 - 7