Motorola MC9500-K User Manual page 38

3 - 2 MC9500-K Mobile Computer User Guide
LED Indications (Continued)
Table 3-1
Off
Battery Status LED
Off
Slow Blinking Amber
(1 blink every 2 seconds)
Slow Blinking Red
(1 blink every 2 seconds)
Solid Green
Solid Red
Fast Blinking Amber
(2 blinks/second)
Single Blink Amber (when Power button pressed)
Blinking Amber (when Power button pressed)
WAN Radio Status LED (MC9596 or MC9598 only)
Slow Blinking Green
Off
NOTE For information about scanning/decoding, see
status and settings, see
Integrator Guide.
LED State
Chapter 5, Using the
Indication
Not enabled.
Indicates that the:
•
battery is not charging
•
MC9500-K is not connected correctly to the cradle
or not connected to a power source.
•
cradle is not powered.
Indicates that a healthy battery is charging.
Indicates that an unhealthy battery is charging.
Indicates that a healthy battery is fully charged.
Indicates that an unhealthy battery is fully charged.
Indicates a charging error, e.g.:
•
temperature is too low or too high.
•
charging has gone on too long without completion
(typically eight hours).
Battery depleted.
Battery over-temperature condition.
WAN activity.
No WAN activity.
Chapter 4, Data Capture. For information about WAN radio
Phone, or refer to the MC9500-KSeries Mobile Computer