Motorola MC9500-K User Manual page 17

Charging the Battery
Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 9-2.
CAUTION
Before using the MC9500-K for the first time, charge the battery using either a charging cable or a cradle:
For cable and cradle setup and charging procedures refer to the MC9500-K Series Mobile
NOTE
Computer Integrator Guide.
•
USB Charging Cable
•
Charge Only Cable
•
Single Bay USB Cradle
•
Four Bay Charge Only Cradle
•
Four Bay Ethernet Cradle.
Align and hook the MC9500-K interface pocket onto the cradle's or cable's cleat. The battery automatically begins
charging. See
Table 1-1
Battery Status LED
Battery Status LED
Table 1-1 LED Charge Indicators
Battery Status LED
Off
Slow Blinking Amber
(1 blink every 2 seconds)
Slow Blinking Red
(1 blink every 2 seconds)
Solid Green
Solid Red
for charging indications. The 4800 mAh battery fully charges in less than six hours.
Indicates that the:
•
battery is not charging
•
MC9500-K is not connected correctly to the cradle or not connected to a
power source.
• cradle is not powered.
Indicates that a healthy battery is charging.
Indicates that an unhealthy battery is charging.
Indicates that a healthy battery is fully charged.
Indicates that an unhealthy battery is fully charged.
Getting Started
Indication
1 - 5