Motorola MC9500-K User Manual page 153

Vehicle Cradle
Troubleshooting the Vehicle Cradle
Table 9-7
Symptom
MC9500-K battery
charging LED does
not light up.
MC9500-K battery is
not recharging.
Four Slot Battery Charger
r
Troubleshooting The Four Slot Battery Charger
Table 9-8
Symptom
Battery not charging.
Possible Cause
Cradle is not Ensure the power input cable is securely connected to the cradle's
receiving power. power port.
MC9500-K was Replace the MC9500-K in the cradle. The 4800 mAh battery fully
removed from the charges in less than six hours.
cradle too soon.
Battery is faulty. Replace the battery.
No power to Ensure that power is applied to the charger. The Battery Status
charger. LED flashes amber to indicate that the battery is charging.
MC9500-K is not Remove the MC9500-K from the cradle, and re-insert correctly. If
placed correctly in the battery still does not charge, contact customer support.
the cradle. The MC9500-K battery charging LED slowly blinks amber when
the MC9500-K is correctly inserted and charging.
Ambient Move to an area where the ambient temperature is between 0
temperature of the and 35
cradle is too warm.
Possible Cause
Battery was Re-insert the battery in the charger or re-connect the charger's
removed from the power supply. The 4800 mAh battery fully charges in less than six
hours.
charger or charger
was unplugged
from AC power too
soon.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
No power to Ensure that power is applied to the charger. The Battery Status
charger. LED flashes amber to indicate that the battery is charging.
Battery contacts not Verify that the battery is seated in the battery well correctly with the
connected to contacts facing down.
charger.
Maintenance & Troubleshooting 9 - 11
Action
o
C.
Action
o
C