Motorola MC9500-K User Manual page 109

Select the Hands-free service name and select Connect. The MC95XX connects to the headset. Refer to the
5.
headset user manual for instructions on communicating with a Bluetooth device.
During an active connection, the MC95XX cannot go into suspend mode when the Power Button is pressed. A
6.
message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Serial Port Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
MC95XXUse the Connection Wizard to search for a Bluetooth serial device.
1.
Select the device and tap Next. The Connection Favorite Options window appears.
2.
In the Local COM Port: drop-down list select a COM port.
3.
Tap Finish.
4.
ActiveSync Using Serial Port Services
NOTE By default, COM ports COM5, COM9, COM11, COM21, COM22 and COM23 are Bluetooth virtual ports. If an
application opens one of these ports, the Bluetooth driver activates and guides you through a Bluetooth
connection.
Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable
connection. You must configure the application that will use the connection to the correct serial port.
ActiveSync Connection Settings Window on PC
Figure 7-5
To establish an ActiveSync connection:
MC95XXEnsure that the Sync profile is enabled on the MC95XX. See Profiles Tab on page 7-35 for more
1.
information.
Use the Connection Wizard to search for a Bluetooth device, such as a PC. In the drop-down list select
2.
ActiveSync via Bluetooth.
Select the device and tap Next. The Connection Favorite Options window appears.
3.
Using Bluetooth 7 - 21