Motorola MC9500-K User Manual page 135

Four Bay Ethernet Cradle
This section describes how to use a Four Bay Ethernet cradle with the MC9500-K. For setup and cradle
communication setup procedures refer to the MC9500-K Integrator Guide.
The Four Bay Ethernet cradle:
•
Provides 5.4 VDC power for operating the MC9500-K.
•
Connects up to four MC9500-K devices to an Ethernet network.
•
Simultaneously charges up to four MC9500-K devices.
•
Mounts on a wall or desktop using the appropriate mounting bracket.
Charging
To charge the MC9500-K:
Ensure that the cradle is connected to power.
1.
Align and hook the MC9500-K interface pocket onto the cradle's cleat. If available, use the guide to assist in
2.
placement of the MC9500-K onto the cradle.
Hooking the MC9500-K onto a Four Slot Cradle
Figure 8-6
Accessories 8 - 9