Motorola MC9500-K User Manual page 139

Vehicle Battery Charger
This section describes how to use the Vehicle Battery Charger.
Charging the Battery
To charge a spare battery:
Ensure that the charger is connected to power.
1.
Insert the spare battery into the slot to begin charging.
2.
Release Button
Vehicle Battery Charger
Figure 8-10
The charging status is indicated on the front of the battery. See
indications. The 4800 mAh battery fully charges in less than six hours.
To remove the battery, press the release button. The battery ejects from the charger.
Table 2-7 on page 2-8 for charging status
Accessories 8 - 13