Motorola MC9500-K User Manual page 130

8 - 4 MC95XX Series Mobile Computer User Guide
Single Bay USB Cradle
This section describes how to use a Single Bay USB cradle with the MC9500-K. For power and USB
communication setup procedures refer to the MC9500-K Series Mobile Computer Integrator Guide.
The Single Bay USB Cradle:
•
Provides 5.4 VDC power for operating the MC9500-K.
•
Synchronizes information between the MC9500-K and a host computer. Refer to the MC9500-K Integrator
Guide for information on setting up a partnership between the MC9500-K and a host computer.
•
Charges the MC9500-K's battery.
Charging the MC9500-K Battery
To charge the MC9500-K battery:
Ensure that the cradle is connected to power.
1.
Align and hook the MC9500-K interface pocket onto the cradle's cleat.
2.
Hooking the MC9500-K onto the Single Bay USB Cradle
Figure 8-1