Assembling The Pneumatic Chain Tensioner - Markusson Grindomatic V12 Original Instruction Manual

Assembling the stand
3. Start by placing the base piece on the floor.
Place the front piece on top of the base piece
by aligning the holes they have on the front
right and left corners. Bolt the front piece to the
base through the two holes using the provided
wrench.
G
4. Next, attach the two side pieces to each other
with provided bolts through the holes at the
intersection of two pieces to create the side
support piece.
J
G
38 Grindomatic 201708 EN
5. To complete the assembly of the stand, bolt the
side support first to the base and then to the
front piece.
G
9.1 Assembling the pneumatic
chain tensioner
To assemble the pneumatic chain tensioner, lay the
stand on the floor with the front piece facing up.
1. First, attach the handle to the pneumatic chain
tensioner.
Grindomatic