Controls - Markusson Grindomatic V12 Original Instruction Manual

Product Description

3.5 Controls

Pos Part
Chain pusher switch
A
Grinding speed knob
B
Emergency stop button
C
Grinding wheel motor switch
D
Grinding head positioning button
E
Power button
F
10 Grindomatic 201708 EN
A
B
C
Description
ON: starts the chain feed, so that the chain moves in a forward
direction. OFF: Stops the chain feed.
Sets the grinding speed.
Low speed: Grinds the chain at low speed in a pulsing motion to
avoid that the chain gets burned.
High speed: grinds the chain at a high speed without the pulsing
motion.
Shuts off the power and stops the machine. The emergency stop
button is used to turn off the machine after operation and to do an
emergency shut-down.
Starts the grinding motor.
Changes the angle of the grinding head from left to right, or vice
versa.
Turns on the machine.
Grindomatic
D
E
F