Operation
5.
Set the grinding wheel switch to OFF.
6.
Use the profile template to verify that the
grinding wheel has the same profile as the type
of chain to be sharpened.
7.
Repeat steps 4-7 until the grinding wheel profile
is the same as the selected profile on the
profile template.
5.2.2
Setting the head-tilt angle
Note: Read the specifications from the chain
manufacturer to find out the recommended head-tilt
angle for your chain.
1.
Loosen the head-tilt angle knob located on the
back of the machine.
18 Grindomatic 201708 EN
2.
Turn the grinding head to set the desired head-tilt
angle (50-90°) on the head-tilt angle scale. The
default head-tilt angle is 60°.
3.
Tighten the head-tilt angle knob.
5.2.3
Setting the top-plate angle
Note: Read the specifications from the chain
manufacturer to find out the recommended top-plate
angle for your chain.
1.
Use the hex key (provided with the machine) to
loosen the top-plate angle screw up to three
turns.
2.
Turn the grinding head to set the desired
top-plate angle (0-35°) on the top-plate angle
scale. The default top-plate angle is 30°.
3.
Tighten the top-plate angle screw.
Grindomatic