Making The Grinding Settings - Markusson Grindomatic V12 Original Instruction Manual

Operation
5.2.5

Making the grinding settings

1. Press the power button to turn on the machine.
2. Press the grinding head positioning button to
move the grinding head so that it is tilted in the
correct start position for the next cutting link to
be ground.
3. Lift the grinding head to its uppermost position.
4. Read the specifications from the chain
manufacturer to find the pitch for the chain that
is to be sharpened. If you don't know the
correct pitch, calculate it by measuring the
distance in inches between 3 rivets, and divide
it by 2.
X
20 Grindomatic 201708 EN
5.
6.
7.
X÷2=
8.
Loosen the chain pitch wing-nut and move it to
the correct pitch position. Tighten it again.
Note: Adjusting the pitch is not the same thing
as adjusting the cutting tooth length (see
number 13 below).
Set the chain pusher switch to ON. The chain
pusher arm now advances the chain forward.
Visually make sure that the chain pusher stops
its movement exactly above the rivet behind the
cutting link, as illustrated in the image below.
Set the chain pusher switch to OFF, when the
grinding head is in its uppermost position and
the chain lock is not engaged.
Grindomatic