Installation; Safety During Installation; Site Requirements; Unpack The Machine - Markusson RJ12 Owner's Manual

Installation

4 Installation

4 .1 Safety during installation

WARNING Before you install, operate or do maintenance on the machine, you must read the safety information
in this manual . Obey the instructions in this manual to prevent injuries or damage to the equipment .
WARNING Always wear safety gloves, protective glasses, and any other personal protective equipment
suitable for the current work task .

4 .2 Site requirements

WARNING Put the machine indoors, in a dry area with good light and a flat and level floor . Do not let the
machine become wet or moist . Do not put the machine near gas, liquids or other materials that can catch fire or
explode .
WARNING The machine must always be fixed to the floor or to a workbench . Make sure that it is safely
attached .
Note: Machines can be set up on a bench or you can use the optional stand . Please note that mounting hardware for
the bench is not supplied with the machine .

4 .3 Unpack the machine

Note: For a video demonstration of how to unpack, assemble, install, and operate the machine, visit markusson .se .
1 . Unpack the box .
Note: Keep the delivery box and packing materials . Pack the machine in them if it is moved or sent for service .
The box and packing materials will minimize the risk of damage during transportation .
2 . Make sure that all parts in the list below are included in the delivery:
• RJ12 Chain Grinder machine
• RJ12 Chain Grinder User manual (this document)
• rectangular profile stone (55 x 15 x 15 mm) and profile template
• toolkit with : hex key, which is used to set the right and left cutters to equal length
Allen wrench (T10), which is used for tightening
feeler gauge (0 .05 mm), which is used for adjusting the wire
• grinding wheel guard (mounted)
• 2 types of ceramic grinding wheels
• stop clamp
• battery cable (black and red power cable with battery clamps)
Note: For your convenience, you may also use your own tools to assist the machine's assembly .
3 . Remove all packing materials . Leave only the cable ties and the transportation lock that holds the grinding head
in place .
14 RJ12_v1_EN_220223
RJ12