Table 4-1 Descriptions Of The Main Components Of The Zxr10 1800-2S - Zte ZXR10 1800-2S Hardware Description

Chapter 4
ZXR10 1800-2S Chassis
The ZXR10 ZSR V2 series routers are highly flexible by using the modular structure, and
the boards and components are hot swappable. The entire router consists of the chassis,
backplane, MPFU, line interface boards, power supply modules, and fan modules.
The ZXR10 1800-2S is a desktop product. The power supply module and MPFU are fixed
in the chassis. The service boards are installed on the rear panel and the rear leading-out
mode is used.
The ZXR10 1800-2S has two extension types configured with wireless modules: ZXR10
1800-2S(G) and ZXR10 1800-2S(W).
l
The ZXR10 1800-2S(G) has a built-in LTE module, where a SIM card slot is available
for supporting GSM, WCDMA, TD-SCDMA, or LTE networks.
l
The ZXR10 1800-2S(W) has a built-in WiFi module for supporting the WiFi function.
Table of Contents
Structure ....................................................................................................................4-1
Power Supply .............................................................................................................4-6
4.1 Structure
4.1.1 Overview and Structure
Overview
The height of the ZXR10 1800-2S chassis (excluding the antenna) is 1U (1U = 44.45 mm),
and the dimension (width × height × depth) 380 mm × 43.6 mm × 200 mm. For a description
of the main components of the ZXR10 1800-2S, refer to

Table 4-1 Descriptions of the Main Components of the ZXR10 1800-2S

Component Name
Board area
MPFU
Power supply module
SJ-20150204153047-004|2015-03-30 (R1.0)
Description
The ZXR10 1800-2S provides a maximum of two line interface
card slots.
The MPFU of the ZXR10 1800-2S is integrated into the chassis
and cannot be removed.
The power supply module of the ZXR10 1800-2S is integrated on
the device, and cannot be removed or installed.
4-1
Table 4-1.
ZTE Proprietary and Confidential