Table 5 Descriptions For The Indicators - Zte ZXHN H108L Maintenance Manual

There are 9 indicators on the front panel of a ZXHN H108L indicating
the running status of the device, as shown in
indicators are described in
T 5 D
A B L E E S C R I P T I O N S F O R T H E
Indicator Color
Red/Gr
Power
een
DSL Green
Green
Internet
Red
LAN1
LAN2
Green
LAN3
LAN4
WLAN Green
Table 5
.
I
N D I C A T O R S
Description
Red:Indicates the power is just connected or it fails to

function.
Green Steady on: Indicates switched on.

Off: Indicates the power has not been connected

Steady on: Indicates a DSL link is established.

Slow flashing: Indicates no signal is detected.

Fast flashing: Indicates the MODEM is activating.

Steady on: Indicates operating in Route mode and

the ADSL link is established. The IP data packet of
the MODEM can be transmitted and received normally
(For example,
established and a dynamic IP address is allocated.).
Flashing: Indicates operating in Route mode and

there is data packet passing the MODEM.
Off: Indicates operating in Bridge mode or ADSL link

is not established.
Red on:

connected and failed (no DHCP response, no
PPPoE response, PPPoE authentication failed,
no IP address from IPCP, etc.)
Steady on: Indicates a LAN connection is established.

Flashing: Indicates data is transmitting.

Off: Indicates the LAN connection has not been

established
Steady on: Indicates the wireless module is on.

Flashing: Indicates wireless data is transmitting.

Off: Indicates the wireless module is off.

Confidential and Proprietary Information of ZTE CORPORATION
the embedded
Device attempted to become IP
Chapter 1 - Introduction
Figure 1
. These
PPPOE link is
3