System Parameters; Table 2-2 System Parameters Of The Zxr10 3800-8 - Zte ZXR10 1800-2S Hardware Description

l The MPFU is installed in slot 8.
l
PIUs/DPIUs and SPIUs are installed in slots 0 to 7.
The SPIU slots are applicable to SPIU boards. The PIU slots are applicable to PIU
boards. The DPIU board uses two slots, including one PIU slot and its neighboring
PIU/DPIU slot.

2.1.3 System Parameters

For the system parameters of the ZXR10 3800-8, refer to

Table 2-2 System Parameters of the ZXR10 3800-8

Parameter
Physical parameter
Storage capacity
Slot
DC power (single)
AC power (single)
Heat dissipation system
Grounding resistance
SJ-20150204153047-004|2015-03-30 (R1.0)
Dimensions (width ×
height × depth)
Weight (full
configuration)
Maximum power
consumption
Memory
FLASH
Total number of slots
Number of PIU slots
Redundancy mode
Maximum output power
Rated input voltage
Input voltage range
Redundancy mode
Rated input voltage
Input frequency range
Rated output power per
module
Number of fan modules
2-3
Chapter 2 ZXR10 3800-8 Chassis
Table 2-2.
Specification
17.41 in. × 5.20 in. × 7.88 in. (442 mm ×132
mm ×200 mm)
< 25.4 lb. (11.5 kg)
< 240 W
2 GB
4 GB
9
8
1+1 redundancy, supporting AC and DC mixed
power supply
250 W
-60 V DC to -48 V DC
-72 V DC to -38 V DC
1+1 redundancy, supporting AC and DC mixed
power supply
100 V AC to 240 V AC
50 Hz to 60 Hz
250 W
1
Resistance of joint grounding < 5 Ω
ZTE Proprietary and Confidential