5.2 Power Supplies
ZXR10 ZSR V2 serial routers support a voltage within the range of 100 V–240 V, AC power
of 50 Hz –60 Hz, and DC power from -38 V to -72 V. The 1+1 dual-power redundancy mode
and power supply swapping are available.
The power modules have the following functions:
l
Alarms are generated due to a high input or output voltage.
l
Alarms are generated due to a high output current.
l
Alarms are generated due to a high or low temperature.
Caution!
Turn off both power supplies before installing and maintaining the ZXR10 ZSR V2.
5.2.1 AC Power Module
Panel
Figure 5-5
Figure 5-5 Panel of the AC Power Module
Indicators
For functions of the indicators on the AC power module of the ZXR10 2800-3E chassis,
refer to
Table
Table 5-4 Functions of the Indicators on the Panel of the AC Power Module of the
ZXR10 2800-3E Chassis
Indicator
RUN
ALM
Buttons
For functions of the power buttons on the AC power module of the ZXR10 2800-3E chassis,
refer to
Table
SJ-20150204153047-004|2015-03-30 (R1.0)
shows the panel of the AC power module of a ZXR10 2800-3E chassis.
5-4.
Number
1
1
5-5.
Chapter 5 ZXR10 2800-3E Chassis
Color
Description
Green
The power module is operating properly.
Red
The power module is operating improperly.
5-5
ZTE Proprietary and Confidential