Table 10-10 Wiring Sequence Of The Shdsl Cable; Table 10-11 Technical Parameters Of The Shdsl Cable - Zte ZXR10 1800-2S Hardware Description

ZXR10 ZSR V2 Hardware Description
An SHDSL cable provides four ports (two wires for each port) at the RJ11 connector side.
For the wiring sequence of the SHDSL cable, refer to

Table 10-10 Wiring Sequence of the SHDSL Cable

Pin Number at
End A
4 (Line0 A)
5 (Line0 B)
1 (Line1 A)
2 (Line1 B)
3 (Line2 A)
6 (Line2 B)
7 (Line3 A)
8 (Line3 B)
For the technical parameters of the SHDSL cable, refer to

Table 10-11 Technical Parameters of the SHDSL Cable

Parameter
Impedance
Cable type
Wire gauge (inner conductor)
Core
10.2.6 Synchronous/Asynchronous Serial Cable
The ZXR10 ZSR V2 series routers use synchronous or asynchronous serial cables to
transmit synchronous or asynchronous signals. The serial cables can be divided into the
following types:
l
V.35/V.24 DTE cable (RA-DTE-DB50-DB25): A DB25 male connector is used at the
network end.
l
V.35/V.24 DCE cable (RA-DCE-DB50-DB25): A DB25 female connector is used at
the network end.
l
V.35/V.24 DTE cable (RA-DTE-DB50-34pole): A 34pole male connector is used at the
network end.
l
V.35/V.24 DCE cable (RA-DCE-DB50-34pole): A 34pole female connector is used at
the network end.
For an overview of the V.35/V.24 DTE cable (RA-DTE-DB50-DB25), see
SJ-20150204153047-004|2015-03-30 (R1.0)
Color Pin Number at End B
White/green 3
Green 4
White/orange 3
Orange 4
White/blue 3
Blue 4
White/brown 3
Brown 4
Specification
100 ohms
Symmetric CAT5e twisted pair cable
24AWG
8
10-10
Table 10-10.
Label
B1 port 1
B2 port 2
B3 port 3
B4 port 4
Table 10-11.
Figure
ZTE Proprietary and Confidential
10-10.