Slot Layout; Figure 3-2 Front View Of The Zxr10 2800-4 Chassis; Figure 3-3 Front View Of The Zxr10 2800-4 Chassis; Table 3-1 Description Of The Main Components Of The Zxr10 2800-4 Chassis - Zte ZXR10 1800-2S Hardware Description

ZXR10 ZSR V2 Hardware Description

Figure 3-2 Front View of the ZXR10 2800-4 Chassis

1. Power supply module
2. SPIU line interface board
slots
For a description of the main components of the ZXR10 2800-4 chassis, refer to

Table 3-1 Description of the Main Components of the ZXR10 2800-4 Chassis

Component Name
Board area
Power supply module
Fan module

3.1.2 Slot Layout

For a front view of the ZXR10 2800-4 chassis, see

Figure 3-3 Front View of the ZXR10 2800-4 Chassis

The ZXR10 2800-4 chassis provides five service slots and boards are horizontally installed
in the chassis.
l
The MPFU is installed in slot 4.
l
PIUs/DPIUs and SPIUs are installed in slots 0 to 3.
The SPIU slots are applicable to SPIU boards. The PIU slots are applicable to PIU
boards. The DPIU board uses two slots, including one PIU slot and its neighboring
PIU/DPIU slot.
SJ-20150204153047-004|2015-03-30 (R1.0)
3. PIU/DPIU line interface
board slots
4. Fan module
Description
The ZXR10 2800-4 provides one slot for the main control
forwarding board and at most four slots for line interfaces.
The ZXR10 2800-4 provides two slots for power modules. You can
configure one or two power modules.
The ZXR10 2800-4 provides one vertically installed fan module.
Figure
3-2
5. MPFU slots
3-3.
ZTE Proprietary and Confidential
Table 3-1.