ZXR10 ZSR V2 Hardware Description
l
Supports board information query and temperature monitoring.
l
Supports the 75 Ω or 120 Ω configuration.
The board provides jumpers X6, X9, and X10 to configure the interface resistance to
75 Ω or 120 Ω. By default, the interface resistance is 75 Ω. For the interface resistance
configuration, refer to the following table.
Jumper
X6
X9 and X10
The jumper configuration can be performed by professionals only.
Panel
For the panel of the RAC-PIU-16CE1 board, see
Figure 9-15 Front Panel of the RAC-PIU-16CE1 Board
Interface Properties
For the interface properties of the RAC-PIU-16CE1 board, refer to
Table 9-43 Interface Properties of the RAC-PIU-16CE1 Board
Property
Connector type
Operational mode
Applied standard
Supported link protocol
Supported network
protocol
Indicators
For a description of the indicators of the RAC-PIU-16CE1 board, refer to
SJ-20150204153047-004|2015-03-30 (R1.0)
75 Ω
2-3: ON
ON
Caution!
Description
DB50
Full duplex
ITU-T
G.703, G.704
PPP, ML-PPP, HDLC,
IP
120 Ω
1-2: ON
OFF
Figure
9-15.
FR
9-24
ZTE Proprietary and Confidential
Table
9-43.
Table
9-44.